musicode:start
This is an old revision of the document!
Table of Contents
Musicode project MuPIF portal
This page is intended to provide specific information for Musicode users of MuPIF platform.
Prerequisites
- MuPIF Installation required - use musicose branch from github (https://github.com/mupif/mupif/tree/Musicode), described in https://mupif.readthedocs.io/en/latest/userman.html#platform-installation
Connecting to MuPIF infrastructure
- Install WireGuard VPN software from https://www.wireguard.com/install/
- You need VPN client configs to connect to MuPIF infrastructure. You will find them in AES-encrypted ZIP file on the Musicode ownCloud (under MUSICODE/Data types and services/VPN folder). The passwords have been sent in dedicated e-mail. If not available for your organization, please send a request to borek.patzak@cvut.cz
- On Linux: save the client configuration file in /etc/wireguard, use wg-quick to bring up the interface (e.g. sudo wg-quick up musicode_peerX.conf).
- On Windows: in the WireGuard GUI, click on “Add Tunnel” and then “Import tunnel(s) from file…”; import the {peer}.conf file and activate the tunnel.
- Test the connection:
$ pyro5-nsc -n 172.22.2.1 -p 10000 ping Name server ping ok.
MuPIF Services
- Platform online monitor http://mupif.org/musicode/
musicode/start.1638967387.txt.gz · Last modified: 2021/12/08 13:43 by bp